TRANSCODER SETTINGS PLEX MAC MINI PRO
TRANSCODER SETTINGS PLEX MAC MINI PC

Corsair Commander Pro to control the fans (see script and code)ĬPU FAN: 1xCorsair H60 CPU Radiator - Front OS: 1 x Kingston UV400 120GB SSD - boot driveįANS: 3xFractal R3 120mm - 3 Front, 1 Rear. SSD: 4 x Samsung 850 EVO Basic (500GB, 2.5') - VMs/Jails Use existing Drives 8 x10TB WD Red, 8 圆TB WD Red, 8 x4TB WD PurpleĬPU: Xeon E5-2620v4 + Corsair H60 Cooler block.1 xLSI Logic Controller Card 05-25699-00 9305-24i 24-Port SAS 12Gb/s PCI-Express 3.0 Host Bus Adapter.6 xCableCreation Internal Mini SAS HD Cable, Mini SAS SFF-8643 to Mini SAS 36Pin SFF-8087 Cable.1 xNORCO 4U Rack Mount 24 x Hot-Swappable SATA/SAS 6G Drive Bays Server Rack mount RPC-4224.

Corsair Commander Pro to control the fans (see script and code)

3 xNoctua NF-F PWM (120mm) * having noted later in Stux's thread that 1500 RPM is not sufficient to cool the HDDs.

TRANSCODER SETTINGS PLEX MAC MINI PC

2 xNoctua NF-A8 PWM Premium 80mm PC Computer Case Fan.

4 x Kingston Value RAM (32GB, DDR4-2400, ECC RDIMM 288).

1 x Corsair HX1200 (1200W) - PSU to support 24 HDD + several SSD and PCI cards.

1 x Kingston UV400 120GB SSD - boot drive (hit the 3D NAND/TRIM bug with the original WD green selection, failing scrub and showing as corrupted OS files) Decided to go with no mirror and use the config backup script.

2 x WD Green 3D NAND (120GB, 2.5') - Boot drives (maybe mess around trying out the thread to put swap here too link).

1 x ASUS Z10PA-D8 (LGA 2011-v3, Intel C612 PCH, ATX) - Dual socket MoBo.

changed it to read-write.Īiming to mostly replicate the build from (with some mods, hopefully around about as good as that link) I have struck through the items above for that reason).ĮDIT2: I saw that the iocage fstab was read-only (not much point in a temp location that you can't write to). (thanks to DeMoB here for the idea on that one, even if I did the ramdisk a little differently using the article from I noticed that my testing VM where I had tried some of this out (running TrueNAS Core Nightlies) crashed last night and after the reboot, it was expecting to see the RAMpool (because I had imported it in the GUI. Mdconfig -a -t swap -s 6g -u 1 & zpool create RAMpool md1 & zfs create RAMpool/plextmp & chown -R plex:plex /mnt/RAMpool/plextmp & chmod -R 775 /mnt/RAMpool/plextmp You could think about setting up a pre-init task with the command: The mapping in the jail will work as long as the RAMpool is recreated with the same name and permissions each time, so no need to do that last part again. you need to think about how you will do that every time your server restarts: Once you tested that and are happy with it. Set plex to use that location (/mnt/tmp in the example above) using the Plex Interface (Settings, Transcoder, Show Advanced, Transcoder temporary directory) Iocage fstab -a plex /mnt/RAMPool/plextmp /mnt/tmp nullfs rw 0 0 Then add the dataset in the jail in the GUI if you did the import, otherwise: Then set the permissions you need for the Plex jail user i n the GUI if you did that import, otherwise:Ĭhown -R plex:plex /mnt/RAMpool/plextmp (substitute plex user UID if you don't have one matching on the host) Optionally export the pool so you can put it in the GUI (using Storage Pools Add, import existing pool after the export at CLI) Then Create the dataset to put in your plex jail There you would have a device of 6GB at /dev/md1 (vary the size to suit your needs)

Transcoder settings plex mac mini